Safe Code Change MGN SOP

Procedure#:HB SOP 96

Function:Management Policies

Implementation Date:053023


Policy/Purpose: At times it is necessary to change the safe code for each individual location. This process is done after any shift leader/management termination and as needed throughout the year. 


Programing The Digital Combination Lock 

Changing the 1st user code (code length:1-8digit code) 

  1. Open the safe and locate the red reset button on the inside of the door. 
  2. Press the reset button, there will be 2 beeps and a yellow light will appear for 20 seconds. 
  3. Before the yellow light disappears enter a new code and press the “*” key. The new code must be between 3 to 8 digits. If the code is valid, the keypad will beep twice. If a wrong code has been entered or code entry has failed, there will be 5 beeps, wait for the yellow light to disappear and repeat above steps 1-3. 
0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *